The Cisco 880 Series Integrated Services Routers combine Internet access, security, voice, and wireless services onto a single, secure device that is simple to use and manage for small businesses and enterprise small branch offices and teleworkers. The Cisco 880 Series delivers features including firewall, content filtering, VPNs, and wireless LANs (WLANs) at broadband speeds to small offices. Easy deployment and centralized management features enable enterprises or service providers to deploy the Cisco 880 Series in small branch offices or small businesses.
Product Overview
Cisco 880 Series Integrated Services Routers are fixed-configuration routers that provide collaborative business solutions for secure voice and data communication to small businesses and enterprise teleworkers. They offer concurrent broadband services over third-generation (3G), Metro Ethernet, and multiple types of DSL to provide business continuity. Wireless 802.11n and 3G offer LAN and WAN mobility. The routers provide the performance required for concurrent services, including firewall, intrusion prevention, content filtering, and encryption for VPNs; optional 802.11g/n for mobility; and quality-of-service (QoS) features for optimizing voice and video applications. In addition, the web-based Cisco Configuration Professional configuration tool simplifies setup and deployment. Centralized management capabilities give network managers visibility and control of the network configurations at the remote site.
Cisco 880 Series Integrated Services Routers offer:
? High performance for broadband access in small offices and small branch-office and teleworker sites
? Collaborative services with secure analog, digital voice, and data communication
? Business continuity and WAN diversity with redundant WAN links: Fast Ethernet, G.SHDSL, 3G, and ISDN
? Survivable Remote Site Telephony (SRST) voice continuity for enterprise small branch-office and teleworker sites
? Enhanced security, including:
? Firewall with advance application and control for email, instant messaging (IM), and HTTP traffic
? Site-to-site remote-access and dynamic VPN services: IP Security (IPsec) VPNs (Triple Data Encryption Standard [3DES] or Advanced Encryption Standard [AES]), Dynamic Multipoint VPN [DMVPN], Group Encrypted Transport VPN with onboard acceleration, and Secure Sockets Layer (SSL) VPN
? Intrusion prevention system (IPS): An inline, deep-packet inspection feature that effectively mitigates a wide range of network attacks
? Content filtering: A subscription-based integrated security solution that offers category-based reputation rating; keyword blocking; and protection against adware, malware, spyware, and URL blocking
? Four-port 10/100 Fast Ethernet managed switch with VLAN support; two ports support Power over Ethernet (PoE) for powering IP phones or external access points
? Secure 802.11g/n access point option based on draft 802.11n standard with support for autonomous or Cisco Unified WLAN architectures
? CON/AUX port for console or external modem
? One USB 1.1 port for security eToken credentials, booting from USB, loading configuration
? Easy setup, deployment, and remote-management capabilities through web-based tools
Tables 1 and 2 list the routers that currently make up the Cisco 880 data and SRST series, respectively.
Table 1. Cisco 880 Series Data Models
|
Models
|
WAN Interface
|
LAN Interfaces
|
802.11g/n Option
|
Integrated 3G
|
Integrated ISDN Dial Backup
|
|
Cisco 881
|
10/100-Mbps Fast Ethernet
|
4-port 10/100-Mbps managed switch
|
Yes (Cisco 881W)
|
Yes (Cisco 881G)
|
-
|
|
Cisco 888
|
G.SHDSL
|
4-port 10/100-Mbps managed switch
|
Yes (Cisco 888W)
|
Yes (Cisco 888G)
|
Yes
|
Table 2. Cisco 880 Series SRST Models
|
Models
|
WAN Interface
|
LAN Interfaces
|
Voice Ports
|
802.11g/n Option
|
|
Cisco 881 SRST
|
10/100-Mbps Fast Ethernet
|
4-port 10/100-Mbps managed switch
|
4 foreign-exchange-station (FXS) ports and 1 foreign-exchange-office (FXO) port for public-switched-telephone-network (PSTN) fallback
|
Yes (Cisco 881 SRSTW)
|
|
Cisco 888 SRST
|
G.SHDSL
|
4-port 10/100-Mbps managed switch
|
4 FXS ports and 1 Basic Rate Interface (BRI) port for PSTN fallback
|
Yes (Cisco 888 SRSTW)
|
Summary
Cisco 880 Series Integrated Services Routers combine increased network performance with advanced security to allow small-office customers to get the most from their broadband connections. With models supporting different broadband technologies such as DSL, 3G, and Metro Ethernet, the Cisco 880 Series can be deployed at any small-office location. Optional integrated 802.11g/n wireless capabilities provide true business-class WAN and WLAN access in a single solution. With the Cisco 880 Series, enterprise IT managers and service providers can take advantage of a solution that can be easily set up at the remote site and can be centrally managed to reduce ongoing operational costs.
Product Specifications
Tables 4 through 6 list software and hardware features of the Cisco 880 Series.
Table 4. Cisco IOS Software Features on Cisco 880 Series: Advanced Security Feature Set (Default)
System Specifications
Table 8 lists the system specifications for the Cisco 880 Series Routers.
Table 8. System Specifications
|
Feature
|
Specification
|
|
Default DRAM
|
? 256 MB on Cisco 880 Series data models
? 512 MB on Cisco 880 Series SRST models |
|
Maximum DRAM
|
? 768 MB |
|
Default and maximum Flash memory
|
? 128 MB on Cisco 880 Series data models
? 256 MB on Cisco 880 Series SRST models |
|
WAN
|
? Fast Ethernet
? G.SHDSL (2- and 4-wire support) with ISDN backup
? Fast Ethernet and 3G WAN for Code Division Multiple Access (CDMA) and high-speed downlink packet access (HSDPA) |
|
LAN switch
|
? Managed 4-port 10/100BASE-T with autosensing MDI/MDX for autocrossover |
|
Standard 802.11g/n access point based on IEEE 802.11n draft 2.0 standard
|
? Optional on all models |
|
Console or auxilliary port
|
? RJ-45 |
|
One USB 1.1 port for advanced aecurity features such as security tokens or USB Flash
|
? One USB 1.1 port on Cisco 881 and Cisco 888 Series Routers
? USB devices supported:
? USB eTokens
? USB Flash
Note: USB 1.1 port cannot be used for connecting external devices other than those specified at: http://www.cisco.com/en/US/partner/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.html.
|
|
ISDN BRI S/T
|
Available on:
? Cisco 888 for out-of-band management and dial backup or primary
? Point-to-multipoint configurations |
|
3G express card modem
|
Available on:
? Cisco 881G for out-of-band management and backup or primary
? Cisco 888G for out-of-band management and backup or primary |
|
External power supply
|
? Universal 100- to 240-VAC input; 60W, 12-VDC output |
|
Inline PoE
|
? Optional internal adapter for inline PoE on 2 switch ports for IP phones or external wireless access points; 802.3af compliant and Cisco PoE compliant |
|
G.SHDSL specifications
|
? Conexant Chipset
? Support for 2- and 4-wire modes
? Support for Annex A and Annex B starting with Cisco IOS Software Release 12.4(15)XZ
? Support for wetting current (Section A.5.3.3 of G.991.2)
? Support for dying gasp; uses power status bit (Section 7.1.2.5.3 of G.991.2) for signaling
? Symmetrical WAN speeds of 2.304 Mbps per pair |
|
Wireless specifications
|
? 2.4 GHz |
|
Data rates supported
|
? 802.11b: 1, 2, 5.5, 6, 9, and 11 Mbps
? 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
? 802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, and m0-m15 |
|
Maximum transmit power (2-channel aggregate)
|
Note: Maximum power setting is subject to changes by channel and by region, depending on regulations.
? 802.11b 20 dBm
? 802.11g 17 dBm
? 802.11n 16 dBm |
|
3G specifications
|
|
Data rates
|
? CDMA: 850 and 1900 MHz
? HSDPA: 850, 900, 1800, 1900, and 2100 MHz |
|
Physical dimensions and weight
|
Product dimensions:
? Nonwireless models:
? H x W x D = 1.9 x 12.8 x 9.8 in. (48 x 325 x 249 mm) (includes rubber feet)
? H x W x D = 1.75 x 12.8 x 9.8 in. (44 x 325 x 249 mm) (without rubber feet)
Wireless models:
? H x W x D = 1.9 x 12.8 x 10.4 in. (48 x 325 x 264 mm) (includes rubber feet)
? H x W x D = 1.75 x 12.8 x 10.4 in. (44 x 325 x 264 mm) (without rubber feet; excludes antennas)
? Weight: 5.5 lb (2.5 kg) maximum |
|
Power
|
Product power specifications:
? AC input voltage: 100 to 240 VAC
? Frequency: 50 to 60 Hz
? Maximum output power: 60W
? Output voltages: 12 VDC
Optional internal PoE with external adapter:
? Maximum output power: 80W
? External output voltage: 48 VDC |
DSLAM Interoperability
Table 9 lists the Cisco supported DSL access multiplexers (DSLAMs) for the Cisco 888 Series.
Table 9. G.SHDSL DSLAM Interoperability
|
DSLAM (Chipset)
|
ECI Hi-Focus SAM 480 (Infineon)
|
Alcatel ASAM7300 (Conexant)
|
Lucent Stinger (Conexant)
|
Siemens Hix-5300 (Infineon)
|
| |
2-Wire
|
4-Wire
|
2-Wire
|
4-Wire
|
2-Wire
|
4-Wire
|
2-Wire
|
4-Wire
|
|
Cisco 878
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
Ordering Information
Table 10 lists ordering information for the Cisco 880 Series. To place an order, visit the Cisco ordering homepage.
Table 10. Ordering Information
|
Part Number
|
Product Name
|
|
Ethernet
|
|
CISCO881-K9
|
Cisco 881 Ethernet Security Router
|
|
CISCO881W-GN-A-K9
|
Cisco 881 Ethernet Security Router 802.11n FCC Compliant
|
|
CISCO881W-GN-E-K9
|
Cisco 881 Ethernet Security Router 802.11n ETSI Compliant
|
|
CISCO881W-GN-P-K9
|
Cisco 881 Ethernet Security Router 802.11n Japan Compliant
|
|
Ethernet and 3G
|
Configurable 3G Bundles
|
|
CISCO881G-K9
|
Cisco 881 Ethernet Security Router with 3G
|
|
CISCO881GW-GN-A-K9
|
Cisco 881 Ethernet Security Router with 3G, 802.11n FCC Compliant
|
|
CISCO881GW-GN-E-K9
|
Cisco 881 Ethernet Security Router with 3G, 802.11n ETSI Compliant
|
|
Ethernet and 3G
|
3G Carrier Bundles
|
|
CISCO881G-S-K9
|
Cisco 881G Ethernet Sec Router w/ 3G B/U Sprint
|
|
CISCO881G-V-K9
|
Cisco 881G Ethernet Sec Router w/ 3G B/U Verizon
|
|
CISCO881G-A-K9
|
Cisco 881G Ethernet Sec Router w/ 3G B/U GSM North America
|
|
G.SHDSL
|
|
CISCO888-K9
|
Cisco 888 G.SHDSL Router with ISDN backup
|
|
CISCO888W-GN-A-K9
|
Cisco 888 G.SHDSL Wireless Router with ISDN backup; 802.11n FCC Compliant
|
|
CISCO888W-GN-E-K9
|
Cisco 888 G.SHDSL Wireless Router with ISDN backup; 802.11n ETSI Compliant
|
|
G.SHDSL and 3G
|
Configurable 3G Bundles
|
|
CISCO888G-K9
|
Cisco 888 G.SHDSL Router with 3G
|
|
CISCO888GW-G-AN-K9
|
Cisco 888 G.SHDSL Wireless Router with 3G; 802.11n FCC Compliant
|
|
CISCO888GW-G-EN-K9
|
Cisco 888 G.SHDSL Wireless Router with 3G; 802.11n ETSI Compliant
|
|
SRST
|
|
C881SRST-K9
|
Cisco 881 SRST Ethernet Security Router with FXS, FXO
|
|
C881SRSTW-GN-A-K9
|
Cisco 881 SRST Ethernet Security Router with FXS, FXO; 802.11n FCC Compliant
|
|
C881SRSTW-GN-E-K9
|
Cisco 881 SRST Ethernet Security Router with FXS, FXO; 802.11n ETSI Compliant
|
|
C888SRST-K9
|
Cisco 888 SRST G.SHDSL Router with FXS, BRI
|
|
C888SRSTW-GN-A-K9
|
Cisco 888 SRST G.SHDSL Router with FXS, BRI; 802.11n FCC Compliant
|
|
C888SRSTW-GN-E-K9
|
Cisco 888 SRST G.SHDSL Router with FXS, BRI; 802.11n ETSI Compliant
|
|
Teleworker
|
|
CISCO881-K9
|
Cisco 881 Ethernet Security Router
|
|
CISCO881W-GN-A-K9
|
Cisco 881 Ethernet Security Router 802.11n FCC Compliant
|
|
CISCO881W-GN-E-K9
|
Cisco 881 Ethernet Security Router 802.11n ETSI Compliant
|
|
CISCO881W-GN-P-K9
|
Cisco 881 Ethernet Security Router 802.11n Japan Compliant
|
|
POE
|
|
800-IL-PM=2
|
2 port 802.3af capable inline power module for 880 routers
|
|
DRAM
|
|
MEM8XX-256U512D
|
256-MB DRAM upgrade to 512 MB for Cisco 880 Series Routers
|
|
MEM8XX-256U768D
|
512-MB DRAM upgrade to 768 MB for Cisco 880 Series Routers
|
|
MEM8XX-512U768D
|
512-MB DRAM upgrade to 768 MB for Cisco 880 Series Routers
|
|
|
3G Modem
|
|
PCEX-3G-CDMA-V
|
Cisco 3G EVDO Modem-Verizon Network
|
|
PCEX-3G-CDMA-S
|
Cisco 3G EVDO Modem-Sprint Network
|
|
PCEX-3G-CDMA
|
Cisco 3G EVDO Modem
|
|
PCEX-3G-HSPA-A
|
Cisco HSPA Modem-North America
|
|
PCEX-3G-HSPA
|
Cisco 3G HSPA Modem
|
|
Router Software
|
|
C880data-universalk9-mz
|
Universal image for Cisco 880 ISR Data Router Series
|
|
C880voice-universalk9-mz
|
Universal image for Cisco 880 SRST Router Series
|
|
Access Point Software
|
|
ap801-k9w7-tar
|
Autonomous software image for ap801
|
|
ap801-rcvk9w8-tar
|
LWAPP recovery image for ap801
|
|
Software License for Cisco 880 Data
|
|
SL-880-ADSEC (default)
|
Cisco 880 Advanced Security Image Feature License
|
|
SL-880-AIS (upgrade option)
|
Cisco 880 Advanced IP Services Image Feature License
|
|
Software License for Cisco 880 SRST
|
|
SL-SRST880-AIS (included by default)
|
Cisco 880 Advanced IP Services Image Feature License
|
|
Security Services
|
|
SL-CNFIL-88x-1Y
|
One year subscription to Content Filtering for Cisco 881/888-URL/Phishing
|
|
SL-CNFIL-8xx-TRI
|
30 day free trial license for 88x series
|
|
SSL
|
|
FL-WEBVPN-10-K9
|
Feature License SSL VPN for Up to 10 Users (incremental)
|
Cisco License Manager is a secure client- and server-based application used to manage Cisco IOS Software activation and licenses. For more information about Cisco License Manager, visit http://www.cisco.com/go/clm.
Table 11 gives the Cisco IOS Software images for the Cisco 880 data and SRST Series routers.
Table 11. Cisco IOS Software Images for Cisco 880 Data and SRST Series Routers
|
Series
|
Models
|
Image
|
Default Feature License
|
First Cisco IOS Software Release
|
|
Router Software
|
|
Cisco 880 data series
|
Cisco 881, 888, 881G, and 888G models
|
C880data-universalk9-mz
|
SL-880-ADSEC
|
12.4(20)T; S880D-UK9-12420T
|
|
Cisco 880 SRST series
|
Cisco 881 SRST and 888 SRST models
|
C880voice-universalk9-mz
|
SL-SRST880-AIS
|
12.4(20)T; S880V-UK9-12420T
|
|
Access Point Software
|
|
ap801
|
Cisco 881, 888, 881G, 888G, 881 SRST, and 888 SRST models
|
ap801-k9w7-tar
|
-
|
12.4(10b)JA3
|
--
